SV-10/SV-100 Features & Benefits? A&D

SV-10/SV-100 Features & Benefits

Features	Benefits
Low viscosity measurement ( SV-10 )	SV-10 measures low viscosity from 0.3mPa.s to 10,000mPa.s without any change of sensor plates, so it is simple and easy to use.
Wide measurement range	Without any change of sensor plates, SV-10 can measure viscosity from 0.3 - 10,000mPa.s and SV-100 from 1,000 - 100,000mPa.s, so it is useful for applications measuring from low viscosity to high viscosity.
High measurement accuracy	Repeatability is very important for viscosity measurement so SV series offers accuracy of repeatability +/- 1% of reading of viscosity measurement.
Temperature measurement	Viscosity is very much affected by temperature so SV series has temperature sensor located in between 2 sensor plates for accurate temperature measurement.
Viscosity calibration	Viscosity calibration function is very simple and easy with standard liquid or fluid with known viscosity by selectable 1 point or 2 point calibration. This is conducted at user's site anytime to save time and cost for calibration.
Small sample size	Standard Sample Cup requires only 35ml or more of sample volume and optional Small Sample Cup ( AX-SV-32) holds 10ml and Glass Sample Cup (AX-SV-33) holds 13ml sample volume so users do not waste the samples and can save costs.
WinCT-Viscosity	RSVisco is software to convert measurement data of viscosity and temperature from SV series into a graphic display for easy understanding and analysis. Data is saved as " CSV " file so it is easy to send the measurement data by e-mail.
Real time measurement	Viscosity and temperature measurement is displayed on a real time basis after 15 seconds by pressing "START", so it is useful for measuring the change of viscosity and temperature of the sample properties throughout the measurement.
Flowing sample measurement	Rotational viscometer cannot measure viscosity when sample fluid is flowing, but SV series can, making it ideal for measuring viscosity when user stirs to mix or spread fluids or temperature. The overflow application for viscosity measurement in process is good for controlling the quality of the viscosity measurement.
Foaming sample measurement	Due to small amplitude of sensor plates, SV series does not deform the sample fluid, so it is ideal for measuring the viscosity of sample fluid with some bubbles in it.
Sol and gel measurement	When samples such as protein, albumen and starch, etc., are heated, some properties such as sol and gel are changed. It is useful for measuring viscosity and temperature of sample fluid to analyze the sample property.
Easy cleaning	Small sensor plates and temperature sensor are easy to clean, so users save time in between measurements.
Vacuum fluorescent display	Easy to see and prevent an error reading because of vacuum fluorescent display of 13mm height for viscosity measurement and 11mm height for temperature measurement.
Standard RS-232C interface	Easy to send viscosity and temperature measurement from SV to PC with WinCT-Viscosity software, and save measurement data so users do not need to spend extra cost for data acquisition applications.
Non-Newtonian sample measurement	Non-Newtonian fluid has the property of changing its viscosity when shear stress is applied. In such a case, a rotational viscometer may have a different viscosity measurement result when spinning speed of spindle is changed as the shear-thinning (pseudoplastic liquids) becomes less viscous at higher shear rates (spinning speed in rpm) and as shear-thickening (dilant liquids) become more viscous at higher shear rates. This is because the structure of sample fluid is destroyed by the rotating spindle. But the SV series vibrates the sensor plates with 30Hz of resonant frequency with small amplitude so as not to destroy much of the structure of the sample fluid. This measures the viscosity of Non-Newtonian sample fluids in a short time.
Continuous measurement	Even though viscosity changes from low to high viscosity or high to low viscosity, SV series has a wide viscosity measurement range even without changing the sensor plates, so it is ideal for measuring changes in property of sample fluids as viscosity as well as temperature changes over a long time. This is especially useful in applications involving brewing, distilling and fermenting processes, etc. Also, WinCT-Viscosity software is useful for automatic data acquisition applications for continuous measurement.
High viscosity measurement ( SV-100 )	SV-100 can measure viscosity from 1,000mPa.s to 100,000mPa.s ( 1 - 100 Pa.s ) without changing the sensor plates for use-friendly measurement.
" CLr " function	In Function setting, user can return all function settings as well as calibration value back to the factory settings, so it is easy for users to return to the default settings in one easy step.