Product

Software

WinCT-Plus (Freeware)

"WinCT-Plus" (Windows Communication Tools Plus LAN & Multi Rs Version) is Windows Data Communication Software for LAN Connection enabling to connect multiple A&D electronic balances/scales equipped with an RS-232C interface to a LAN port of a computer via Ethernet or directly to the COM ports on the computer for data collection.

Brochure (PDF 281MB)

Manual for the AD8526 (PDF 1.6MB)

Manual for the OP-08 (PDF 1.5MB)

RsMulti is a software that enables multi-data acquisition from A&D's electronic balances and scales over an Ethernet network or through an RS-232C connection.

Enables data acquisition from multiple weighing instruments with a single computer.
Ethernet network and RS-232C connection can be used simultaneously.
Weighing instruments can be controlled by sending commands from the computer
Data is transmitted to the PC by pressing the [PRINT] key on the weighing instrument.
Recorded data can be comprehensively formatted in Microsoft Excel.

Necessary Systems

(1) Computer

OS: Microsoft Windows 2000 onwards
CPU: Equivalent to Pentium class or above recommended
RAM: At least 32MB recommended
Hard Disk: Space of at least 50MB required
Display resolution: 800 × 600 or higher recommended

(2) For connection via Ethernet

Ethernet Hub*
A&D balance/scale equipped with an RS-232C interface + AD-8526, or balance equipped with an OP-08
LAN cable (straight cable*)

* If Ethernet hub is not used, cross cables should be used for LAN cabling.

(3) For connection via RS-232C cable (ComPort)

A&D balance/scale equipped with an RS-232C interface
RS-232C cable

DeviceInstaller is required to set the IP address and other configuration information of A&D balances and scales.

Please download the latest version of DeviceInstaller
32 bit compatible > https://ts.lantronix.com/ftp/DeviceInstaller/Lantronix/4.4/4.4.0.7/Installers/Download_Web/DI_x86DL_4.4.0.7.msi
64 bit compatible > https://ts.lantronix.com/ftp/DeviceInstaller/Lantronix/4.4/4.4.0.7/Installers/Download_Web/DI_x64DL_4.4.0.7.msi

Com Port Redirector enables virtual serial communication from A&D balances and scales connected to an Ethernet network (Virtual COM port). With the virtual COM port connection, serial communication software such as RsCom or your original serial communication software can be used directly.

You can download the latest version of Com Port Redirector below.

Windows XP, Vista, 7 (32bit) CPR_x86DL_4.3.0.3.msi
> https://ts.lantronix.com/ftp/cpr/Lantronix/4.3/4.3.0.3/Installers/Download_Web/CPR_x86DL_4.3.0.3.msi
Windows Vista, 7, 8.1, 10, 11 (64bit) CPR_x64DL_4.3.0.3.msi
> https://ts.lantronix.com/ftp/cpr/Lantronix/4.3/4.3.0.3/Installers/Download_Web/CPR_x64DL_4.3.0.3.msi

Page Top