Product

Weighing

LC-1205 (Tool Steel)

For general purpose tension, compression measuring

*Rod end bearing not include

Capacity	Model No.
20 kgf	LC1205-K020
50 kgf	LC1205-K050
100 kgf	LC1205-K100
200 kgf	LC1205-K200
500 kgf	LC1205-K500
1 tf	LC1205-T001A
2 tf	LC1205-T002
5 tf	LC1205-T005

Setup Manual (PDF 325KB)

Features

Dual guided cantilever and shear beam design for high accuracy
Compact, lightweight and easy to handle
Temperature compensation maintains both zero and span from -10 °C to +60 °C (+14 °F to +104 °F)
Moisture proof
Can be used for multi-point weighing

Specifications

Rated capacities .......................................20 kgf, 50 kgf, 100 kgf, 200 kgf, 500 kgf, 1 tf, 2 tf, 5 tf
Rated output ..............................................2 mV/V±0.5% (20 kgf, 50 kgf - 1.5 mV/V ± 0.5%)
Maximum safe overload ..........................200% of rated capacity
Combined error ........................................±0.02% of rated output
Creep...........................................................±0.1 %of rated output/hour
Zero balance .............................................±2% of rated output
Compensated
temperature range.................................... -10 °C to 60 °C/14 °F to +104 °F
Recommended
excitation Voltage ......................................12 V
Maximum.
excitation voltage .......................................15 V
Input terminal resistance .........................Approximately 400 Ω
Output terminal resistance ......................350 Ω ± 3.5 Ω
Insulation resistance ................................Greater than 5000 MΩ at DC50 V
Temperature effect
-Zero ............................................................0.007% of rated output/°C
-Span ..........................................................0.002% of rated output/°C Typ.
Cable length .............................................3 m/118 inches (1, 2 & 5 t -5 m/197 inches)

Drawing

Product

Weighing

Load Cells Q&A

Introduction to Load Cells

Measurement Knowledge